PL-CLR is a liquid photoinitiator compound developed specifically for thicker clear films where low yellowing is necessary. It provides a perfect balance between surface cure and through cure to enable the best possible adhesion in these systems. Because it’s a liquid, it works well as a press side additive for the printer. PL-CLR is soluble in most monomers, oligomers and pre-polymers. It is insoluble in H2O.
Unit of Measure
Performance Properties
Performance Properties |
N/A Easy to use Liquid Excellent through and Surface Cure Low Yellowing Very Fast Curing |
Typical Properties
Acronym |
N/A CLR |
Typical Applications |
N/A
Adhesives Thicker Clear Coatings for Graphic Arts, Wood, Plastics, and Metals White and Pastel Inks and Coatings |
Appearance |
N/A Light Yellow Liquid |
Viscosity @ 25 ºC (cps) |
N/A 6,000 – 8,000 |
Boiling Point |
N/A >250 ºC |
Specific Gravity |
N/A 1.1 g/mL |
Odor |
N/A Faint, Characteristic |
Usage Levels |
N/A 2 – 8 % |
